features

TILT TYPE SWITCH　TC Series  
The tilt type level switch has only one moving part!
Levels are detected by simple and sure operations!
  • It has a simple structure and can withstand severe impact loads of particulates.
  • It can be used for upper, middle, and lower limits.
  • No power source is needed and wiring cost is low.

operating principles

When the main body hung from the top of the tank is tilted by the repose angle of the measured substance, the tilt of the main body is detected and the contact is switched.
When the measured substance passes over, the output contact is restored to the initial state.		 tilt image

Standard Specification

Specification／Model TC-3 TC-1
Weight About 1.3Kg (Aluminum casting) About 11Kg (Cast-iron)
Output Contact SPDT x 1 SPDT x 1
Contact Capacity 250VAC 10A 250VAC 10A
Temperature -10～+80℃
（No condensation / no freezing）		 -10～+120℃
（No condensation / no freezing）
Conduit Connection 3/8″ (with gland) 1/2″ (with gland)
Conformable Cable 3/8 inch three-core cable 1/4 inch two-core cable
Sensing-paddle fitting NPT 1/2 NPT 1
Enclosure Rating IP-56 IP-56

  • Product Lineup

    • TC-3
      Standard

    • TC-1
      Heavy Loading type