FluidScan-M
On-line Sensor for Mixture Ratio Measurement
　It is most suitable for measuring the concentration and turbidity of high-concentration liquids.
　The liquid concentration and turbidity (mixing degree and whiteness degree) are measured using the principle of light scattering that varies according to the whiteness degree of the liquid. Processes can be stabled by control and alarm.
  • Detection of variation point of water/milk
  • Detection of variation points among dairy products
  • Measurement of fermentation degree in beer processes
  • Measurement of oil content in water/moisture in oil
  • Measurement of concentration of rolling-mill lubricant/processing machinery oil
  • Measurement of drainage turbidity
FluidScan-F
On-line Sensor for Mixture Ratio Measurement
　It is most suitable for measuring the concentration of low-concentration solutions and mixture of such solutions in clear water.
　The liquid concentration, liquid type, and solid substances in the liquid can be detected by measuring the light transmission density and absorbance. It contributes to the improvement of product quality and efficiency in raw material collection.
  • Measurement of alcohol concentration
  • Detection of filter damage
  • Measurement of a yeast filter
  • Gelatin measurement
  • Control of the regeneration process of ion-exchange resin
FluidScan-R
On-line Sensor for Content Quality Monitoring
　It can measure soluble solid substances and liquid concentration. It is intended for heavy duty substances.
　Liquid concentration and composition are measured using the principle of light refraction that varies with the liquid composition and content. Quality control can be automated by the improvement of product quality and accurate discrimination of liquid types.
  • Measurement of soluble solid substances
  • Measurement of sugar concentration
  • Measurement of salt and alcohol concentrations
  • Measurement of concentration of rolling-mill lubricant/processing machinery oil
  • Measurement of various chemical concentrations
  • Detection of solid substances in a filtration process
FluidScan-S
On-line Sensor for Fat Content Measurement
　It is most suitable for measuring fat concentration in milk/liquid and product composition.
　Fat concentration in milk and blend ratio and composition of various solutions in the chemical, pharmaceutical, and food business fields can be measured through optical spectrum measurement. Stabilization and standardization of product quality are realized.
  • Measurement of fat concentration in milk
  • Measurement of mass of cheese
  • Measurement of composition of general solutions including cream and yogurt
  • Measuring range: 0 to 40% (optimum range: 0 to 10%)
FluidScan-COD
Optical COD Analyzer
　It is most suitable for measuring the COD level in drainage.
　Light with a wavelength suitable for drainage is irradiated in the liquid and the measured illuminance is output as the COD level. It contributes to on-line measurement in the drainage line and environmental conservation.
  • Measurement of drainage in the dairy industry
  • Food, chemical, and pharmaceutical fields
  • Measuring range: 0 to 15,000 ppm
  • Reduction of burden for drainage sample measurement